Learning

                        How to make simple circuits

1. Get a 10-volt bulb, bulb holder, 9-volt battery and 2 wires. Using two wires of different colors makes this process easier.
2. Screw a bulb into a bulb holder.
3. Remove about an inch of wire covering from each end of the wires with a wire stripper or a pair of scissors.
4. Connect one end of a wire to the positive end of a 9-volt battery and the other end to the center of the bulb holder. Generally, red is used to connect the positive end.
5. Connect the other wire to the negative end of a 9-volt battery and the other end to the side of the bulb holder. Generally, black is used to connect the negative end.
6. Now your bulb will light up.

                              This is a simple circuit that i told to you.